I'm looking for wiring diagrams for my car. Velocity Motors provided someone with a really good diagram for their maxima; i think it was from DIE od DEI or something like that but i can't find it.
| 12V|WHITE/ red |+ |ignition harness |
| STARTER|BLACK / YELLOW |+ |ignition harness |
| SECOND STARTER|BLACK/ blue |+ |ignition harness |
| IGNITION|BLACK/ red |+ |ignition harness |
| ACCESSORY|BLACK/ pink |+ |ignition harness |
| SECOND ACCESSORY|WHITE/ blue |+ |ignition harness |
| POWER LOCK|gray |- |smart entrance control *1 |
| POWER UNLOCK|purple |- |smart entrance control *1 |
| LOCK MOTOR|RED / blue | |smart entrance control *1 |
| UNLOCK MOTOR|yellow | |smart entrance control *1 |
| DISARM DEFEAT|WHITE/ red | |smart entrance control *1 |
| PARKING LIGHTS +|RED / blue | |steering column |
| HEADLIGHTS|RED / yel(L),lt blu(R)|+ |steering column |
| DOOR TRIGGER|RED / white *3 |- |drivers kick panel or SECU |
| DOME SUPERVISION|use door trigger | | |
| TRUNK/HATCH PIN|red or RED / blue |- |light in trunk |
| HOOD PIN|pink/black |- |smart entrance control *1 |
|TRNK/HTCH RELEASE|ORANGE / black |- |smart entrance control *1 |
| FCTRY ALARM ARM|lt GREEN/ red |- |smart entrance control *1 |
|FCTRY ALRM DISARM|GREEN/ YELLOW |- |smart entrance control *1 |
| TACHOMETER|WHITE/ black | |6 pin plug at distributor |
| SPEED SENSE|PURPLE / red | |ECM, pin 26 *2 |
| BRAKE WIRE|RED / green |+ |brake pedal switch |
| HORN TRIGGER|brown or grn/yel |- |steering column |
| WIPERS|lt grn/rd,lt grn/blk|- |steering column (L, H) |
| LF WINDOW UP/DN|green - blue |A |drivers window switch |
| RF WINDOW UP/DN|RED / wht - RED / blk |A |drivers switch or kick panel|
| LR WINDOW UP/DN|yel/red - yel/blk |A |drivers switch or kick panel|
| RR WINDOW UP/DN|grn/wht - grn/blk |A |drivers switch or kick panel|
Notes:
NOTE: Some models have an immobilizer system that needs to be bypassed during remote start. *1 The smart entrance control unit is located to the right of the steering column. It is black or blue in color. *2 The ECM is located in the front of the center console on the transmission hump. DO NOT UNPLUG THE ECM. *3 To avoid dome light delay use RED / green for the driver door, red for the front passenger door, and RED / black for the rear doors. All 3 three wires are located at the smart entrance control unit. Must diode isolate each.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA