Horns: Constant to Pulse
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44188
Printed Date: May 15, 2024 at 6:28 PM
Topic: Horns: Constant to Pulse
Posted By: Jaice
Subject: Horns: Constant to Pulse
Date Posted: December 01, 2004 at 12:36 AM
I'm Installing Air horns with my alarm siren, but I don't really want to have the constant sound when going off, I want it to pulse, what would I need to do that and how would I install it?
Replies:
Posted By: wblakes
Date Posted: December 01, 2004 at 1:34 AM
i know that dei alarms have a programmalbe setting to have a pulse horn. otherwise you have to get a light flasher to do that.
Posted By: dantemc
Date Posted: December 01, 2004 at 11:34 AM
hey jaice, i personally would just add a flasher between the relay and the compressor. all you have to do is take the output from the relay, hook that up to "x" on the flasher, then run another wire from from the "L" on the flasher to the 12v input on the compressor. it should pulse nicely and flashers are extremely cheap. let me know if that helps. later
Posted By: meltingplastic
Date Posted: December 01, 2004 at 2:11 PM
yup.. a flasher was $3 when i bought one to fix a friends parking light flash.. works great!
-------------
Driving a Bagged, Caddied 02 s10
|