Print Page | Close Window

t.blazers auto lock problem?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44221
Printed Date: October 30, 2025 at 6:32 PM


Topic: t.blazers auto lock problem?

Posted By: mxxmikexx
Subject: t.blazers auto lock problem?
Date Posted: December 01, 2004 at 2:03 PM

has anyone had problems with trailblazers auto locking after they sit for 2-3 hrs. after a remote start/keyless unit has been installed? this is the first ive heard of it, i have a customer with a 2004 trailbalzer and we installed a audiovox 686 remote starter and a dei 455g interface module for the door locks. he is claiming that after the truck sits for 2-3 hrs. it will automatically lock, and i guess chevy has told him that this is a problem with trailblazers with aftermarket keyless systems installed on them. i had the truck in the bay yesterday for a few hours and couldnt get the truck to replicate the problem. just figured i would post the question on here and see what feedback i get.



Replies:

Posted By: Velocity Motors
Date Posted: December 01, 2004 at 4:33 PM

Try two things:

Use a relay to trigger the ground when running wire for the module from the Audiovox unit



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: Velocity Motors
Date Posted: December 01, 2004 at 4:35 PM
Also, is your connection within 6" from the connector ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: mxxmikexx
Date Posted: December 01, 2004 at 4:50 PM
"Use a relay to trigger the ground when running wire for the module from the Audiovox unit"

use a relay to trigger which ground?
yes the connection is within 6" from the connector




Posted By: Velocity Motors
Date Posted: December 01, 2004 at 5:23 PM

Use a relay triggered by the Audiovox's ground out when running wire/status wire/3rd IGN wire to ground.

https://www.velocitymotorsport.com/images/install_notes/N2N.jpg

This seems to be a growing problem with bypass modules where the remote start units are not giving the status wire enough ground and this causes intermittent problems with the modules and the data wire. I have done this to a few older Autostart units and fixed the module errors that were causing problems on the vehicle they were in.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA





Print Page | Close Window