Program a remote control Viper 791

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44285
Printed Date: May 02, 2024 at 1:16 AM

Topic: Program a remote control Viper 791

Posted By: SECURECAR
Subject: Program a remote control Viper 791
Date Posted: December 02, 2004 at 11:52 AM

Hi guys,

Somebody knows if to program a extra remote control in an Viper 791 XV can i do the autolearn procedure as in the manual says? or i have to follow diferent procedure?.

Thanks for your valuable help.

Replies:

Posted By: Dreadlock
Date Posted: December 03, 2004 at 4:37 PM

https://www.directechs.com/guides/manuals/ig/viper/N564V_6-03.pdf do as it states in the manual

Posted By: SECURECAR
Date Posted: December 06, 2004 at 10:37 AM

thanks Dreadlock, i going to do as the manual says.

Bye.

Posted By: ilvwhtgrls
Date Posted: December 06, 2004 at 2:03 PM

You turn the car into the on position, click the valet button once and then hit lock on your new remote.

-------------
Eye am so re todd did.

Posted By: gus1
Date Posted: December 06, 2004 at 2:19 PM

Door open, ignition on to the run position, one press, then press/hold on valet pushbutton switch, press the lock button on the remote, release switch, turn off ignition, done.

The instructions should have come with the remote.

Gus

-------------
Wherever I go, that is where I end up......

Posted By: ksutton
Date Posted: December 06, 2004 at 9:28 PM

does any one have info on a saturn ion r/s

Print Page | Close Window