pro start r\s
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44377
Printed Date: May 12, 2024 at 7:17 AM
Topic: pro start r\s
Posted By: muaiad97
Subject: pro start r\s
Date Posted: December 03, 2004 at 5:28 PM
hi all i istalld pro start remot starter in honda civic i conect all wires and the car only crancking and keeps crancking if i dont push the brake. help pleas thanx
Replies:
Posted By: mo12v
Date Posted: December 03, 2004 at 7:45 PM
Not sure of Model Number ...
Did you TACH Learn unit??
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: Velocity Motors
Date Posted: December 03, 2004 at 7:56 PM
Where did you grab the tach signal from ? What year Civic ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: muaiad97
Date Posted: December 03, 2004 at 8:37 PM
honda civic 1994
Posted By: Velocity Motors
Date Posted: December 03, 2004 at 9:10 PM
grab the tach at the distributor and use the BLUE wire. Program the unit for this tach wire.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: muaiad97
Date Posted: December 04, 2004 at 1:43 PM
how can i program it if u dont mind to tell
Posted By: sparkie
Date Posted: December 04, 2004 at 2:24 PM
Read the install manual for tach programming. Depending on the model the programming sequence is different. It must be done as well as all the option programming too.
-------------
sparky
Posted By: mo12v
Date Posted: December 04, 2004 at 5:02 PM
What is the Model # of Pro Start
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: mxxmikexx
Date Posted: December 05, 2004 at 3:29 PM
if im correct, most prostarts require you to start the car with the key, step on the brake and push the program button five times and the led should lite up until you release the brake pedal, indicating tach has been learned. thats how its been for all the ones ive seen for the past few years at least.....
Posted By: ck auto
Date Posted: December 05, 2004 at 11:15 PM
hi flash hood pin so park lights stay on for at least 6 seconds then press lock and unlock together if four button button one and two if 2 button then hold both buttons step on brake parklights will flash 4 times start car then wait for idle to stabilize then press brake again if two buton press both together again if you have th ct 3100 you need to do last step if not ingnore last step ------------- good luck
kirk
Posted By: muaiad97
Date Posted: December 06, 2004 at 7:19 PM
thanx l got it
|