2005 dodge 2500 diesel, wait to start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44421
Printed Date: May 21, 2024 at 12:46 AM
Topic: 2005 dodge 2500 diesel, wait to start
Posted By: Lmsc
Subject: 2005 dodge 2500 diesel, wait to start
Date Posted: December 04, 2004 at 1:56 PM
I hope someone can help me because I am about to go crazy. I am looking for the "Wait to start" wire in this truck. Can sombody please help. Where is it found and what color is it. I've read all the post here but none are for 2005. Thanks in advance. Larry ------------- LMSC
Replies:
Posted By: mxxmikexx
Date Posted: December 04, 2004 at 6:12 PM
wait to start interface
most newer trucks you cant interface directly with a "wait to start wire" anymore, this is a quick fix for your problem with a $20 part and 5 minutes of wiring.
or if your using a remote starter that you can program for diesel mode then you dont even have to worry about the wait to start wire B.S.
Posted By: gatf4
Date Posted: December 04, 2004 at 11:42 PM
I had to add a $20 timer/relay that DEI makes and it works perfect. It's adjustable for a delayed crank up to 90secs . I started mine for a few weeks without it, but it wasn't very cold yet.
Posted By: gatf4
Date Posted: December 04, 2004 at 11:46 PM
That picture MXXMIKEXX posted is exactly what I used. It didnt come with a perfect wiring diagram like that though. The directions I got didnt even mention using it for a wait to start application.
Posted By: jc9995
Date Posted: December 05, 2004 at 3:14 PM
FYI, MXXMikexx is exactly correct. I just went through this on my 04.5 2500. There is no wire. just use the delay timer. Your remote start doesnt have one built in?
Posted By: gfella2000
Date Posted: December 07, 2004 at 6:05 PM
Part number is DEI-528T....... The manual show you how to do the rest
-------------
GFELLA 20000000000
Posted By: extreme1
Date Posted: December 07, 2004 at 10:13 PM
truck will start down to -20 with no wait to start.
I used a 10 second delay however.
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: Lmsc
Date Posted: December 13, 2004 at 3:04 PM
Thanks for all the info guys. I connected the "wait to start" wire up to the Acc. wire and now it delays for about 15 sec. Thanks again. Larry ------------- LMSC
|