Print Page | Close Window

2000 Tundra Neutral Safety Switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44430
Printed Date: April 29, 2024 at 12:27 AM


Topic: 2000 Tundra Neutral Safety Switch

Posted By: Steven Kephart
Subject: 2000 Tundra Neutral Safety Switch
Date Posted: December 04, 2004 at 4:22 PM

Hey guys.  I'm doing an install right now and need to know which wire the Neutral Safety Switch is.  I figure it is probably in the steering column, but wasn't sure which wire.  From searching 3 different databases, only one actually mentioned it.  The Omega program I have said "not grounding type (-) OEM switch opens starter kill".  This confuses me as I'm worried that I can't just test for it by looking for a wire that grounds in the park/neutral position.  Anyone have any ideas?

Steven Kephart

Adire Audio



-------------



Replies:

Posted By: daniel2002p
Date Posted: December 04, 2004 at 11:13 PM
this truck is alredy protected from being able to start with the grear whifter in anything but P and N, so you can just ground that wire.

-------------
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!




Posted By: Steven Kephart
Date Posted: December 05, 2004 at 1:02 AM

Awesome!  And thanks.

When I noticed it was completely mechanical I figured I was either screwed or safe.  posted_image



-------------




Posted By: daniel2002p
Date Posted: December 05, 2004 at 11:25 AM
no problem

-------------
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!





Print Page | Close Window