Print Page | Close Window

Advise for Alarm/starter install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44503
Printed Date: July 15, 2025 at 2:46 PM


Topic: Advise for Alarm/starter install

Posted By: jonezybonezy
Subject: Advise for Alarm/starter install
Date Posted: December 05, 2004 at 5:47 PM

I'm about to attemp an install of a Crimestopper 20011IV Alarm/Starter on a 2002 Altima. Does anyone know where I can get a wiring diagram for this vehicle? Any special tools, or connectors that I might need. I did pick up a Universal transponder bypass.I'm pretty proficient in stereo's. This is my first alarm though.

Any help/advise would be greatly appreciated.

Thanx

Jonezybonezy




Replies:

Posted By: cqljohn
Date Posted: December 05, 2004 at 7:46 PM

Try here............

https://bulldogsecurity.com/New%20Wires/New%20Wires/Wires/nisaltima02-05.htm

wiring was correct for my vehicle, but you may want to double check.





Posted By: daniel2002p
Date Posted: December 05, 2004 at 8:20 PM

Nissan

Altima

2002

Remote Starter  Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Start:

 

BLACK/ RED & BLACK / YELLOW

IGNITION SWITCH HARNESS **

Ignition  #1:

 

BLACK/ RED

IGNITION SWITCH HARNESS*

Ignition #2:

 

RED

IGNITION SWITCH HARNESS

Ignition  #3:

 

N/A

Accessory:

 

WHITE/ BLUE

IGNITION SWITCH HARNESS

Brake  Light:

 

RED / GREEN

AT SWITCH ABOVE BRAKE PEDAL

Tach  Signal:

 

Parking Lights:

 

RED / BLUE (+)

DRIVER'S KICK PANEL

Headlights:

 

BLUE & RED / YELLOW (+)

AT MODULE BEHIND PASSENGER HEADLIGHT

Diesel  Glow Plug:

 

N/A

Clutch  Bypass Wire:

 

Notes:

 * This Vehicle Is Equipped With A Transponder Type Engine Immobilizer Theft System. Use Universal Alarm Bypass Module part # 2x402 where X can be any number. See Note #144 ** This Vehicle Is Equipped With Two Start Wires. Both Must Be Powered In Order For Vehicle To Start When Engine Is Cold. See Note #235 *** Test With A Meter While Turning A Key In The Driver's Door Lock Cylinder.

Nissan

Altima

2002

Alarm and Keyless  Entry Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Constant  +12 Volts:

 

GREEN

IGNITION SWITCH HARNESS

OEM Alarm Disarm:

 

WHITE/ BLUE (-)

AT KEY SWITCH INSIDE OF DRIVER'S DOOR ***

Dome  Lights/Superv:

 

COMES ON WITH UNLOCK

SEE NOTE****

OEM Horn:

 

GREEN / WHITE (-)

STEERING COLUMN HARNESS

Power  Lock:

 

PINK (-)

PIN # AT BCM NEAR FUSE BOX

Power  Unlock:

 

BROWN (-)

PIN # AT BCM NEAR FUSE BOX *****

Trunk  Release:

 

RED / BLACK OR BLUE/RED (-)

PIN # AT BCM NEAR FUSE BOX

Alarm  Input Wire:

 

COMES ON WITH UNLOCK

SEE NOTE****

Notes:

**** Multiple Trigger Wires. Use Lt. Blue (-) For Driver's Door, Pink/Blue (-) For Passenger Front Door, RED / Black (-) For Both Rear Doors. All Wires Are Found At The BCM Located To The Right Of The Fuse Box. ***** Unlock Requires Double Pulse. See Note #231. Also See Note #201 Negative Trigger Door Locks.


-------------
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!





Print Page | Close Window