karr alarm remote program
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44556
Printed Date: November 03, 2025 at 10:43 PM
Topic: karr alarm remote program
Posted By: pampanga
Subject: karr alarm remote program
Date Posted: December 06, 2004 at 9:11 AM
1999 acura integra-Think I'm screwed but not sure. I did not do install, have new transmitter, can't locate valet switch/button to program, have looked everywhere, I don't think the person who did install used the valet opt. What next? Problem #2, may relate to alarm interface. When dome light in auto (center position) the door open light on insturment panel stays on. In the on or off position or in auto with dome bulb removed the panel light goes out coming on only when door is open. Bulb is good. Dome light does not come on in the on position with door open. Anty ideas? Thanks,
Mike
Replies:
Posted By: daniel2002p
Date Posted: December 06, 2004 at 10:16 AM
on those alarms, the vallet button is on the back of the LED
-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!
Posted By: secureauto
Date Posted: December 06, 2004 at 8:57 PM
If you can find the valet switch, follow these steps to program the remote:
1. turn ign on with key
2. press valet button 3 times, wait for honk or beep
3. press arm/disarm button on remotes (up to 4 remotes)
wait for honk or beep
4. turn ign off
Posted By: pampanga
Date Posted: December 12, 2004 at 9:31 PM
daniel2002p wrote:
on those alarms, the vallet button is on the back of the LED
Posted By: secureauto
Date Posted: December 12, 2004 at 11:17 PM
Not All of them do, some of the older models
have separate l.e.d and valet.
-------------
ASE Certified
|