Installation Help ’03 Envoy, Prestige 996

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44574
Printed Date: May 12, 2025 at 4:58 PM

Topic: Installation Help ’03 Envoy, Prestige 996

Posted By: brantley
Subject: Installation Help ’03 Envoy, Prestige 996
Date Posted: December 06, 2004 at 12:59 PM

I'm in the process of installing a Prestige 996a in a 2003 Envoy SLE and was just wondering if anyone had any experience with this... In particular, I was wondering about the 555L hookup. The only thing I can't find is which wire to hook up to the BLACK/ blue wire. I can't find anything on the 996a's diagram that matches what anyone here has said about were to hook it up. The only thing I could find was the Ign 3 wire... If that is the right one, pls let me know... Any other tips w/ this combo would be appreciated...

Thanks, Brantley Lancaster

Replies:

Posted By: 94flamds10blazr
Date Posted: December 06, 2004 at 5:09 PM

it needs to be a wire thats active from the time the alarm tried to start it till it kills it

if you did the ignition 3 wire, you would have to hook up a relay to it to change it to a negative so that input will work

Posted By: soundzplus
Date Posted: December 07, 2004 at 11:12 PM

Brantley --

Here's the bottom line - you need to take the Light Blue wire ( ign3) and connect it to the BLue/Blk wire of the DEI 555l this will get it done ---

Also - You need a door lock interface module as well.. this truck requires it - its a 456G -

Hope that helps -- for more info - please contact me soundzplus@aol.com