autopage rs-750lcd manual
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4460
Printed Date: July 20, 2025 at 10:43 AM
Topic: autopage rs-750lcd manual
Posted By: jokerschild275
Subject: autopage rs-750lcd manual
Date Posted: October 14, 2002 at 12:28 PM
Can someone tell me where i can find the instalation manual for the autopage rs-750lcd. I have the users manual but it didnt come with the instalation manual. I tried to email auto page but they told me to ask a dealer for it . the dealer told me that they were not allowed to give me this information. They told me that auto page doesnt allow it because these alarms have to be installed by the dealer. If someone has one and can scan it and send it to me or tell me where i can find it on the internet it would be great....... thanks
Replies:
Posted By: securinu
Date Posted: October 14, 2002 at 3:17 PM
give me a fax #and i will fax it or a addy and i will mail you a copy
Posted By: jokerschild275
Date Posted: October 14, 2002 at 3:28 PM
hey fax it to my work........on the cover sheet put for chris linker. The number is 918-438-6930 Thanks alot
Posted By: securinu
Date Posted: October 14, 2002 at 4:18 PM
faxed
Posted By: COBRASVT
Date Posted: November 07, 2002 at 11:32 AM
Would you please fax one to me as well....I am installing this system this weekend and didn't even know that it didn't come with. Thanks, Ed 678-826-5030 ATTN Ed Wilkinson
Posted By: Velocity Motors
Date Posted: November 07, 2002 at 1:13 PM
https://www.the12volt.com/downloads/file.asp?ID=287 ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: COBRASVT
Date Posted: November 07, 2002 at 2:18 PM
Thanks Jeff!
Posted By: Velocity Motors
Date Posted: November 08, 2002 at 1:34 AM
no problemo
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: berthelr
Date Posted: November 19, 2002 at 1:34 PM
I am looking for the programming section of the installation manual. Would anyone have this in PDF format. Thanks in advance
Posted By: COBRASVT
Date Posted: November 19, 2002 at 1:45 PM
Quote: Originally posted by berthelr on November 19, 2002
I am looking for the programming section of the installation manual. Would anyone have this in PDF format. Thanks in advance
I can copy and fax....
Posted By: berthelr
Date Posted: November 19, 2002 at 1:50 PM
WOuld you be able to fax to 920-459-1658 att: Roland Berthelot thanks so much
Posted By: COBRASVT
Date Posted: November 19, 2002 at 1:58 PM
Quote: Originally posted by berthelr on November 19, 2002
WOuld you be able to fax to 920-459-1658 att: Roland Berthelot thanks so much
sending now
Posted By: berthelr
Date Posted: November 19, 2002 at 2:06 PM
Got it. thanks so much roland
Posted By: COBRASVT
Date Posted: November 19, 2002 at 2:19 PM
Quote: Originally posted by berthelr on November 19, 2002
Got it. thanks so much roland
Roland, Any troubles with your shock sensor?
Posted By: berthelr
Date Posted: November 19, 2002 at 5:45 PM
Cobrasvt, I have not had problems with the shock sensor... except for minor adjustments, I am very pleased with the unit. I would not mind getting a second LCD remote though. any idea where I could get one?
Posted By: COBRASVT
Date Posted: November 19, 2002 at 5:46 PM
Quote: Originally posted by berthelr on November 19, 2002
Cobrasvt, I have not had problems with the shock sensor... except for minor adjustments, I am very pleased with the unit. I would not mind getting a second LCD remote though. any idea where I could get one?
Nope...and I bet they aren't cheap either...lol
Posted By: securinu
Date Posted: November 19, 2002 at 6:02 PM
i use the marksman unit which is just private labeled and they remote are available from them they cost $75 plus shipping , let me know if you want one i have plenty in stock the retail is $149 you can message me here or thru the WWW button above this post.
Posted By: berthelr
Date Posted: November 19, 2002 at 7:03 PM
Securinu, I need to figure out if I can have two LCD units working simultaneously. let me know
Posted By: securinu
Date Posted: November 19, 2002 at 9:03 PM
yes the unit will handle 2 (2 way remotes) and 4 (1 way remotes)
Posted By: berthelr
Date Posted: November 20, 2002 at 9:28 AM
After mentioning that I was please with the unit, the remote start failed to start this morning (it was cold). I notice that the crank was quite short. funny things is that the unit provided feedback on the lcd remote as if the car was actually running. parking lights were on but not start. I drove to work, turn off the car and and restarted with the remote and it start right away. Help.. do I need to re learn the tach. I read somewhere that it is the most consistent and safest way. what about when its really cold? thanks roland
Posted By: securinu
Date Posted: November 20, 2002 at 5:35 PM
i have that same problem on cold mornings i dont have tach hooked up. i did but it use to shut down saying it was over revving but it wasnt the only way i got it to work was to go to voltage sense i also notice that it does the short start when i havent driven in a couple days. might be to much draw on my battery. i have so much stuff i am probably pulling 100 milliamps. but i drive every day excepts someweekends but never more than 2 days .
Posted By: PLAYER69
Date Posted: November 20, 2002 at 5:58 PM
securinu, are you sure it learned teh tach correctly? Usually the overrev is around 2500-3000 rpm? Personally I would never install a remote start with anything other then tach sensing. nothing else works reliably. Perhaps you should try a injector wire if you can't get a proper tach reading.
Posted By: securinu
Date Posted: November 20, 2002 at 7:41 PM
yeah i did program it reads and confirms . i even tried hi revving the engine while programming and figured if i programmed it @ 2500 then the 800-1000 at start would be fine, but still would not work so i programmed to voltage and it was fine. i have had this problem on a few dodges mostly with the 5.9 360 engine like mine.
Posted By: PLAYER69
Date Posted: November 20, 2002 at 8:02 PM
Interesting. I don't use this brand of start but have never had a problem getting a tach signal. In fact there shouldn't be a problem as that truck just uses and ordinary coil. Where are you getting the wire? What year is your truck? I am not saying you are doing something wrong, I just want info for my own refference in the future.
It almost sounds like that unit does have a high enough setting for this tach. It would read as an 8cyl at around 1000 rpm. Perhaps this is the high end of the scale. Is there no manual setting on the tach on this unit?
Posted By: securinu
Date Posted: November 21, 2002 at 7:55 PM
2002 Durango R / T and i tried both an injector and the tach @ the coil and both did the same thing . so the voltage sense at least shuts off when started instead of fixed cranking time.
|