compustar aux channels

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44605
Printed Date: May 12, 2025 at 8:39 PM

Topic: compustar aux channels

Posted By: godsegoizhuge
Subject: compustar aux channels
Date Posted: December 06, 2004 at 8:22 PM

Is there a way to adjust the output time on these 2 aux channels or do I have to goto the dealer to have this done? I really hope I dont have to goto the dealer because I think the closest one to me is like 2 or so hours away.

Replies:

Posted By: godsegoizhuge
Date Posted: December 07, 2004 at 1:50 PM

Just in case, this is the 2W900FM-AS and i'm using the 2 aux channels on my window roll up/down module from DEI.

Posted By: forbidden
Date Posted: December 07, 2004 at 2:27 PM

I just had a similar issue on a 03 F350 with the wait to start wire. Even though the brain has a built in timer, it could only be changed by using the dealer only programming tool. I think a trip to a authorized dealer who has this tool is in order. A side note here, the only dealer with this tool on Vancouver Island (a big box store) would not let us use this tool, rent this tool nor would they work on the customers vehicle when he inquired about it and offered to pay for the service. Find a authorized dealer that is willing to help you.

-------------
Top Secret, I can tell you but then my wife will kill me.

Posted By: godsegoizhuge
Date Posted: December 07, 2004 at 11:06 PM

That's what I was afraid of. Guess tomorrow i'll call one of the dealers down in columbus. Thanks for the help.

Posted By: godsegoizhuge
Date Posted: December 08, 2004 at 12:01 AM

One more question, is it possible to use a relay on the aux channels?? Knowing my luck it probably wouldnt work anyways lol.