Print Page | Close Window

AvantGuard4 Installation Manual Sections?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44615
Printed Date: April 28, 2024 at 11:47 AM


Topic: AvantGuard4 Installation Manual Sections?

Posted By: showngo2000
Subject: AvantGuard4 Installation Manual Sections?
Date Posted: December 06, 2004 at 9:55 PM

Hi everyone, a newbie here.  I have a couple of quick questions about installing the Clifford Avantguard4.  I recently found the installation manual for this alarm, but in certain sections, it says things like "Refer to This Section of the binder for more information."  However,  "This" is not in the installation manual that I have.  Some of the sections are:  Door locks, Door trigger and parking lights, and Window roll-up.  Does anybody have these or have access to these?  I know I'm asking alot, but PLEASE help me out.  I've been trying earnestly to find them, and cannot find them anywhere.  Thanks in advance for all of the help.  I really appreciate it.




Replies:

Posted By: OmarR
Date Posted: December 07, 2004 at 12:08 AM

The only section you really need is door locks, which i have here:

https://home.san.rr.com/iroc/MISC/doorlock_wiring.pdf

As for door trigger:

Gray Wire - Door Trigger

BROWN / Red - connect to ground if neg door trigger, or connect to 12V constant if positive door trigger.

For Windows:

Left Window - WHITE/ Violet to switch side,  Violet to motor side

Right Window - WHITE/ Orange to switch side, Orange to motor side

I could of been more specific, but  you failed to mention what kind of car this is going into.





Posted By: showngo2000
Date Posted: December 07, 2004 at 7:43 AM
Sorry...It's going in a 1999 Ford Contour




Posted By: showngo2000
Date Posted: December 07, 2004 at 7:43 AM
Sorry...It's going in a 1999 Ford Contour




Posted By: showngo2000
Date Posted: December 07, 2004 at 5:46 PM
So, will my Contour need something to bypass the PATS system?





Print Page | Close Window