2000 Nissan Pathfinder remote start/secur
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44659
Printed Date: May 16, 2024 at 8:55 AM
Topic: 2000 Nissan Pathfinder remote start/secur
Posted By: shadman82
Subject: 2000 Nissan Pathfinder remote start/secur
Date Posted: December 07, 2004 at 5:46 PM
I recently bought a 2005 Edition AlphaGuards AG-95G 2-Way Pagers Alarm System with Remote Engine Start
Just wondering if anybody has any tips on install, anything I am going to need or need to know before getting started?
Thanks!
-------------
Shadman82
Replies:
Posted By: hagmanti
Date Posted: December 07, 2004 at 11:57 PM
Get several wiring diagrams for your car. (Start here, try the security of the large Georgetown mascot, etc.)
If you don't have a DMM, buy one.
Check the wires to make sure they do what your wiring diagrams say they do before you hook anything from your RS to your car.
Solder your wires. If you're not comfortable soldering wires, take a long piece of thick (10-12 gauge) and a long piece of thin (around 18 gauge) and practice soldering the wires to each other and themselves.
Give yourself lots of time. If this is your first install, don't plan to use the car that week. (You may well have it working by the end of the day, but things can go wrong...)
If you're not sure what a wire does, ask! Don't just leave it unhooked. . . And by the same token, don't hook up every wire just because you think it might be useful...
Me
Posted By: dantemc
Date Posted: December 08, 2004 at 1:10 AM
hey whats up? i personally own a 2000 pathfinder, and its a little bit more involved then a basic install. if its your first install ever, without any experience, the maybe take it to a pro. if you are determined to do it yourself, i can send you a wiring diagram if you want. also keep in mind there is a chip in the key that needs to be bypassed ( so you need an additional bypass module) , plus a 2nd starter that needs to be fired up with the use of a relay. there is also a factory disarm that needs to be pulsed. let me know if ya need a diagram. good luck
Posted By: ksingh
Date Posted: December 21, 2004 at 8:40 PM
hey whats up i would like to know fi thats the same wiring on a 2004 nissan pathfinder and also if u do have a diagram on disarming the factory alarm and also the diagram for the second starter wire send it to me please
-------------
Kenny
Posted By: auex
Date Posted: December 21, 2004 at 8:45 PM
2000 Pathfinder
2004 Pathfinder------------- Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
|