Ultra Start 2250M Model

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44746
Printed Date: July 18, 2025 at 6:22 PM

Topic: Ultra Start 2250M Model

Posted By: Bohiaa
Subject: Ultra Start 2250M Model
Date Posted: December 08, 2004 at 6:28 PM

Hello Everyone:

I have the Ultra start 2250 M Model and had it wired up Working but not all the functions. "I had it running to a seprate unlock/lock unit.

Noticing that the functions were not working right I got out the directions and installed 2 relays per tech support and installed them NOW I cant get the unit to unlock. everything else works fine...

What am I missing here guys ????

Replies:

Posted By: IMAGE6902
Date Posted: December 08, 2004 at 11:08 PM

Need to know what kind of car and explain "had running to seperate unlock/lock unit? the 2250m has its own keyless entry outputs, so if you mean an aftermarket keyless entry, nix it. the more descriptive you are, the more i can help

-------------
I tell it like it is...

Posted By: Bohiaa
Date Posted: December 08, 2004 at 11:22 PM

Its An 88 Ford ranger.... It had no factory door unlock switch, the seprate unit is no longer in the picture...

I ran the relays as per tech support. had the lock function working, switched the relays out to see if one was bad still nothing....

Posted By: Bohiaa
Date Posted: December 09, 2004 at 9:28 PM

Is there a certain type of relay I'm suppose to be using???

Print Page | Close Window