Accord 01, Clifford Intellistart 4 troubl

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44755
Printed Date: July 18, 2025 at 10:00 PM

Topic: Accord 01, Clifford Intellistart 4 troubl

Posted By: Iambigbaddennis
Subject: Accord 01, Clifford Intellistart 4 troubl
Date Posted: December 08, 2004 at 8:50 PM

Im driving a Honda Accord 2001 Coupe and recently my remote start (Clifford Intellistart 4) is acting funny. When I activated it my car will just stall 3 times and stop, usually if it dosn't work the first time it will work the 2nd or 3rd but it's just stalling 3 times. Has this happened to anyone else here? thanks

Btw it's my first time on this forum, read the other posts an its pretty awesome.

Replies:

Posted By: Teamrf
Date Posted: December 08, 2004 at 9:59 PM

Check your tach. wire.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: Iambigbaddennis
Date Posted: December 09, 2004 at 1:52 AM

Sorry, im not that good with cars. Exactly what is the tach wire? thanks for responding!

Posted By: hagmanti
Date Posted: December 09, 2004 at 9:43 AM

Look in your engine compartment. There should be a few wires that come from the alarm into the compartment. (Possibly in split-loom). One (or 2) will go to the siren. Another will go to the hood-pin. The last will go to tach. Teamrf is suggesting you make sure that tach wire is still securely connected in your car.

I don't believe that's the problem. I think your battery voltage may be getting a little low, or since it's colder, your car needs longer to crank, and your alarm is set to crank for a certain amount of time (not check voltage or tach). This is something the person who installed it for you should fix...

Me