Need to power 3nd ignition

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44807
Printed Date: June 15, 2024 at 8:22 AM

Topic: Need to power 3nd ignition

Posted By: link123
Subject: Need to power 3nd ignition
Date Posted: December 09, 2004 at 1:22 PM

I have a remote starter that only have 2 ignition (+) output, but the vehicle has three ignition wire. I want to power the 3rd ignition up. What is the proper relay layout to do this?

thanks

Shawn

Replies:

Posted By: hagmanti
Date Posted: December 09, 2004 at 1:54 PM

Pin 85 to ign2. Pin 86 to ground when running of the remote start. Pin 30 to 12V. Pin 87 to ign3.

Your remote start might have an ignition output (a low current, thin guage wire that outputs a negative pulse when ignition should be active). For aesthetic reasons, if it has such a wire, hook that wire to pin 86.

Me

Print Page | Close Window