Matrix rs 3.5

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44888
Printed Date: May 17, 2025 at 7:30 AM

Topic: Matrix rs 3.5

Posted By: joe435
Subject: Matrix rs 3.5
Date Posted: December 10, 2004 at 12:40 PM

finnaly got the alarm installed and everything works great but one thing. They have the primary key set to the driver 2 and not the driver 1. How can I change this or should I go back to them and have them change it. I still have to get a second transponder. Can it simply be done with programing?

I have a 04 chevy avalanche

Thanks,

John

Replies:

Posted By: hagmanti
Date Posted: December 10, 2004 at 12:48 PM

No, you need a bitwriter to change those settings...

Me

Posted By: joe435
Date Posted: December 10, 2004 at 1:25 PM

I also had a question about the remote start. When I start it everything is fine but say I stop it the radio will stay on. Then after a amount of time the radio will shut off. Is there a way to disable this? I don't want to disable the radio without the key and that might be the answer.

Thanks,

John

Posted By: hagmanti
Date Posted: December 10, 2004 at 10:33 PM

You need to take the GREEN / WHITE factory rearm wire and use it to pulse the driver's door trigger. (Simulates opening the door after turning off the car, which is what the radio is looking for to shut off).

If you're already using that wire for something else, diode isolate (at least) and preferably drive through relays.

Me

Print Page | Close Window