93 ford explorer, door lock relays, tach

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44942
Printed Date: May 20, 2025 at 1:44 PM

Topic: 93 ford explorer, door lock relays, tach

Posted By: reddodge09
Subject: 93 ford explorer, door lock relays, tach
Date Posted: December 11, 2004 at 11:23 AM

I am having trouble with the door lock relays. The rest at ground. i have tried both 5 wire relay hook ups with no luck. Also the tach wire is reading low and the alarm will not self read cause of low voltage please help

-------------
James

Replies:

Posted By: secureauto
Date Posted: December 11, 2004 at 10:38 PM

Which wires are you using for the doorlocks and tach?
Where are you tagging the wires?

I've also added a link
https://directechs.com/directwire/wire_body.asp?action=select&yr=369&product=Remote%20Start

Posted By: furredoutgixxer
Date Posted: December 11, 2004 at 10:44 PM

factory keyless models are negative trigger and the rest are five wire. pink / YELLOW for lock and pink/green unlock in drivers kick. tach is grey/orange in pass. kick at the engine control module.

MECP Master Installer

Print Page | Close Window