check engine light

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44962
Printed Date: June 27, 2025 at 12:43 PM

Topic: check engine light

Posted By: r2nv
Subject: check engine light
Date Posted: December 11, 2004 at 4:16 PM

here is my problem, I only have one ign wire from the starter mod and have two ign wire to hook up in the car, is there any way to split that one ign wire from the car starter to hook up two in the car, using relay.

Replies:

Posted By: IMAGE6902
Date Posted: December 11, 2004 at 6:48 PM

your starter module should have some type of ground trigger out while remote started, negative ignition, or something to that effect. hook that wire up to 85, 12+ fused constant to 87 and 86, and 30 out to your second ignition. you can do this with as many as you need up to three probably before you would have to use a relay to amplify the negative output.

-------------
I tell it like it is...

Print Page | Close Window