Print Page | Close Window

Install of prostart remot starter ct3300

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44975
Printed Date: June 28, 2025 at 9:32 AM


Topic: Install of prostart remot starter ct3300

Posted By: mrocca100
Subject: Install of prostart remot starter ct3300
Date Posted: December 11, 2004 at 6:36 PM

Hi I just bought a ct3300 car starter (PRO START) I was wondering if I need any relays or anything else extra. All I bought is the retail box from Canadian Tire. If there is anything else I need to install this starter can you please advise. Oh I have a 1995 Grand AM. Automatic trany. Power windows and power trunk. No OEM alarm system. I read the manual inside and out and the only thing I can find on relays is for the anti theft starter kill. relay 34-0734-4. Any info would be great.



Replies:

Posted By: lspker
Date Posted: December 11, 2004 at 9:13 PM
You will need relays for power door locks, trunk release and you may need one for extra ignition if on the car.



Posted By: Daisley
Date Posted: December 11, 2004 at 9:18 PM

I just finished an install of the CT3300, I found the photos, etc on the www.Prostart.org website very helpful.  You need to provide the serial number from your receiver, and the year / make of car.  It provided me with complete breakdown of wire colors, relays needed, photos of where to connect, etc. 

The downside is the total lack of technical support, or how to get help from them. And Canadian Tire can't offer any useful advice about installations.


Print Page | Close Window