trunk release for jetta 1995

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44981
Printed Date: June 28, 2025 at 5:51 PM

Topic: trunk release for jetta 1995

Posted By: stereotornado
Subject: trunk release for jetta 1995
Date Posted: December 11, 2004 at 7:27 PM

l'm installing a viper 350 on a jetta 1995 and l want to install the trunk release, can somebody tell me the wiring diagram for it and the relay diagram if l needed. thanks.

Replies:

Posted By: furredoutgixxer
Date Posted: December 11, 2004 at 8:47 PM

its a grey wire at the back of the switch. you must isolate the switch from the release wire. to wire it you cut the wire, run the wire form the switch side to 87a of a relay. the other side of the wire goes to 30 connect 87 and 86 to 12 volt and 85 to the trunk release wire.

Posted By: stereotornado
Date Posted: December 12, 2004 at 7:16 PM

thank you for help me

Print Page | Close Window