2001 sebring remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45034
Printed Date: June 16, 2025 at 10:45 PM

Topic: 2001 sebring remote start

Posted By: woosh
Subject: 2001 sebring remote start
Date Posted: December 12, 2004 at 3:24 PM

Does anyone have the wire diagram for a 2001 Chrysler
Sebring 4 door. I have a diagram for a 2000 but the wires don't match between diagram and car.

Replies:

Posted By: Velocity Motors
Date Posted: December 12, 2004 at 3:51 PM

https://www.the12volt.com/installbay/forum_posts.asp?tid=26788&KW=2001+Sebring

Here you go.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: woosh
Date Posted: December 12, 2004 at 6:11 PM

Thanks Jeff.

Posted By: woosh
Date Posted: December 14, 2004 at 7:24 PM

How do I test for a tach input, I know you set your DVM to AC but do you connect one leed to positive or ground to get 6 volts or so?

Posted By: hagmanti
Date Posted: December 14, 2004 at 7:53 PM

Actually, it depends on the car and the tach source. Try it both ways.

(But start on positive.)

And don't be hung up on 6 volts-- the important thing is an AC signal that varies w/ RPMs...

Me

Print Page | Close Window