2005 EQUINOX

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45062
Printed Date: May 13, 2025 at 12:00 PM

Topic: 2005 EQUINOX

Posted By: mxxmikexx
Subject: 2005 EQUINOX
Date Posted: December 12, 2004 at 7:09 PM

Whats the deal with the new equinox? you dont use a starter wire anymore? dei says the vehicle will automatically engage the starter when the ignition wire is powered up and the two acc wires lose voltage. does anyone have a diagram showing the easiest way to make this work?

Replies:

Posted By: ksutton
Date Posted: December 12, 2004 at 7:30 PM

its a pice of cake 12v to the ing. 12v to the brown acc. plus your passlock 2 and thats it dont run a tach wire.

Posted By: furredoutgixxer
Date Posted: December 12, 2004 at 7:37 PM

when you install a start you dont have to hook up the starter wire but you have to hook up both accessory wires. because the start looses accy voltage on crank the car will crank automatically. you MUST hook up tach though, or the acc wire will re-energize too soon and the car wont start. if you need colors ask i have them

MECP Master Installer

Print Page | Close Window