Print Page | Close Window

splitting status output wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45068
Printed Date: May 17, 2024 at 2:08 AM


Topic: splitting status output wire

Posted By: audiopete
Subject: splitting status output wire
Date Posted: December 12, 2004 at 8:43 PM

is it ok to split a status output and what is the best way to do using relays i need it to do 2 things when remote starting



Replies:

Posted By: furredoutgixxer
Date Posted: December 12, 2004 at 8:48 PM

sure but only to run up to three relays depending on which start you are using.

MECP Master Installer


Print Page | Close Window