factory disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4513
Printed Date: July 17, 2025 at 10:58 PM

Topic: factory disarm

Posted By: freakystyley990
Subject: factory disarm
Date Posted: October 15, 2002 at 11:32 PM

I have a 1992 caddy seville with a viper 550 esp and i need to know the color, location, and polarity of the factory disarm wire because this alarm is falsing like crazy. Also, will I need to use a relay for this??

-------------
FreakyStyley990

Replies:

Posted By: Montrealler
Date Posted: October 16, 2002 at 4:00 AM

Always better to use relays and fuse (save a lot of money when dooing something wrong)

You are looking for a light green small gage wire

this wirhe turn negative (-) when you unlock the driver door.

location Driver kick pannel from door gromet.

the alarm will not be set if you dont lock the doors while a door is open

Hope this will help!

-------------
Yes I'm Back 2006...

Posted By: freakystyley990
Date Posted: October 16, 2002 at 6:23 PM

thanks! the other question i had was about the remote starter. whenever i use it, the car starts, runs for like 1.5 second and then dies but always stays running on the second try. how can i fix this?

-------------
FreakyStyley990

Posted By: Montrealler
Date Posted: October 16, 2002 at 6:46 PM

tell us if you use a tach sense or voltage sense

if tach where have you find it?

-------------
Yes I'm Back 2006...

Print Page | Close Window