PKT Bypass anygood?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45138
Printed Date: May 07, 2024 at 8:15 PM

Topic: PKT Bypass anygood?

Posted By: srusin1
Subject: PKT Bypass anygood?
Date Posted: December 13, 2004 at 6:00 PM

Im installing a RS in a 2003 Lexus RX300 and was wondering if I should use the 556U or the PKT(no keyrequired)? Is the PKT hard to program, Im asking because i have had troubles with PKMIT module? Any one used this bypass?

Replies:

Posted By: MJA1962
Date Posted: December 13, 2004 at 11:27 PM

I used the PKT in my brother's Rx300. It was no big deal to install or program. As I recall, the instructions confused me a little bit, but nothing major. I think I misunderstood part of the programming instructions, but in reality, it wasn't really hard to figure out at all. Just make sure that you have all keys available to you when programming.

-Michael

Posted By: biker8018
Date Posted: December 15, 2004 at 3:32 AM

only one of the main keys are necassary.Can't be a valet key. It is 6 wires then programming. Press gas 6 times,brake 5 then once more ground brown wire for 1 minute and done. Don't quote me on the exact programming read the instructions but it is easy.

Print Page | Close Window