alarm in oldsmobile 98 touring sedan

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45313
Printed Date: July 18, 2025 at 3:36 PM

Topic: alarm in oldsmobile 98 touring sedan

Posted By: mastahjay69
Subject: alarm in oldsmobile 98 touring sedan
Date Posted: December 15, 2004 at 9:06 PM

i'm obviousely a newb and so i have this question. where am i to locate my stock receiver in the car? i dropped down my glove box and found several small boxes. none have 12 or so wires going to them, mostly only six. also i found wirering diagrams on this site but they do not include things like my trunk release. where do i find another diamgram?

Replies:

Posted By: Hymer
Date Posted: December 15, 2004 at 9:12 PM

Just leave all the stock stuff alone, you shouldn't have to remove anything.. BTW what is the model of your 98 olds??

Posted By: mastahjay69
Date Posted: December 15, 2004 at 9:17 PM

it's 1990 oldsmobile 98 touring sedan. i need to remove the stock set up so that i can put in the new one using the same wires.

Posted By: audifive
Date Posted: December 15, 2004 at 10:05 PM

dont remove anything, just tap into the existing wires. as for the trunk release and other stuff, just go to the location of the switch or button and test the wires with a meter

Posted By: mastahjay69
Date Posted: December 15, 2004 at 10:06 PM

yes but were do i find these wires? i needed to find the original reciever to have all the wires in a central location. from there i can tap into the wires.

Posted By: audifive
Date Posted: December 15, 2004 at 10:50 PM

you can use the guide on this site to help you find the parking light, headlight, horn trigger, door lock and unlock, starter wire(for a starter kill), and constant 12 to power the unit. only thing left would be the trunk release, which like i said you can find at the button in the car. a hood pin you can install yourself if you felt like you needed one for extra security. you could be halfway done with the install before you find the factory keyless unit and confirm what all the wires are for.

Print Page | Close Window