pdata iii?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45316
Printed Date: July 18, 2025 at 5:20 AM
Topic: pdata iii?
Posted By: msmith56
Subject: pdata iii?
Date Posted: December 15, 2004 at 9:44 PM
Could someone please tell me what I just received with my remote start. It has Pldata.III on it and I am not sure if it works the same way as a Pldata II. I asked for the PLDATA that allows you to make 4 connections and you are good to go. But somehow I don't think that is what I got. This will be installed in a 2001 chevy silverado truck with the passlock 2 system in it. For Data out, it shows that it is going to the ignition wire and I had thought that it should be going to the ODB connector and it also has a pot on it to adjust the potentiometer? I scanned the instructions, but couldn't get the file size small enough to post it. Anyone have any idea what this is? Thanks.
Replies:
Posted By: Velocity Motors
Date Posted: December 15, 2004 at 10:46 PM
Where did you purchase this from. All PLDATA or GMBP module are a 4 wire connection that has an automatic learning for Passlock II systems. What it sounds like you got was a manual tuning bypass that you have to manually set the resistance and tap into the actual Passlock wires at the key cylinder.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|