Print Page | Close Window

Relay Starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45413
Printed Date: June 07, 2024 at 4:29 PM


Topic: Relay Starter

Posted By: realsynthetics
Subject: Relay Starter
Date Posted: December 17, 2004 at 9:32 AM

I was browsing the articles on this site, and cam across something interesting. This particular article was dealing with Relays and how I could set them up to make a "makeshift" remote start system. I have an alarm in my car already, and would need to know which wire to use as the remote start trigger. I know that I would probably use the brake pedal as the kill...

But there is another problem too. It says that I need to place diodes between some of the relays and on certain pins, but I'm not sure where I would need to place diodes. I have a 1996 Dodge Intrepid, and don't know what I would need. Please help if you can, because I'm looking into this idea...




Replies:

Posted By: realsynthetics
Date Posted: December 17, 2004 at 9:34 AM

[img]https://www.the12volt.com/images/relayremotestart.gif[/img]

Sorry, there is the image we're dealing with.




Posted By: realsynthetics
Date Posted: December 17, 2004 at 9:34 AM
https://www.the12volt.com/images/relayremotestart.gif  Sorry...this should work. I'm used to other forum formats.


Print Page | Close Window