I have a DEI module for the window roll up in this car (up and down). Note that this car is the R/T series, 2door. I want to install this module but I am having a very hard time trying to locate thaes wires. For some reasons the wires are totally different from the regular stratus and the coupe. Has anyone ever done this car? I already put the alarm and remote starter in. Even while doing that I had to "fly blind" because of the tech sheet that I had was for a stratus coupe and none of the wires even mached. I guess my question is, is there a tech sheet for the R/T version of this car and/or does anyone know the power window wire colors? There are about 8 wires in the driver side door which go into a small black controll box with a circut board in it. Is this even possable.
Thank you for any help and info that can be donate to help me in this strange situation.
-------------
MECP certified (If it really means anything)
Jeremy
I doubt they strayed away from the same design, the drivers door window wires are gonna be in the door and the others are going to be in the drivers kick panel. Do you have a volt metter ? I will walk you through it.
This is not the first time I have done a window roll up. I have done the regular dodge stratus and coupe models for R/S but the wires are different.
-------------
MECP certified (If it really means anything)
Jeremy
the colors are different ? I guess your gonna have to do it the old fashion way, find the wires yourself using the metter
For one I have tested all wires and none of them show either a ground or a + side when the windows are used. This is why I asked the question if it can be done. And by the way daze it is called a meter.
-------------
MECP certified (If it really means anything)
Jeremy