2004 Ford Explorer remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45442
Printed Date: May 13, 2025 at 8:51 AM
Topic: 2004 Ford Explorer remote start
Posted By: ziggyb222
Subject: 2004 Ford Explorer remote start
Date Posted: December 17, 2004 at 6:18 PM
Will a new 2004 ford explorer even try to start with out a bypass module..or will it crank then run and then shut off... I am installing a remote start and it will come on when I push the start button, but doesnt crank.... Was wondering if the bypass module was holding it back or maybe some sort of factory security thing... Any ideas???
Replies:
Posted By: prdjr165
Date Posted: December 17, 2004 at 7:23 PM
It should crank but not start,Check your hoodpin switch,and you might have to program the tach setting on the remote starter first.
Posted By: dustimizer
Date Posted: December 17, 2004 at 8:47 PM
The truck will not crank if the security system does not recieve the proper code from the key or bypass module. Just did one yesterday.
Posted By: ziggyb222
Date Posted: December 18, 2004 at 5:47 AM
dustimizer....you were right.. truck would not crank with out bypass module installed.. all set now....thanks for your help....
Posted By: jonkolo
Date Posted: December 26, 2004 at 9:26 PM
Where did you connect the tach wire? Is your Explorer a V-8 or V-6? Any problems with the remote start? Here is my problem: https://www.the12volt.com/installbay/forum_posts.asp?tid=45797&PN=1&tpn=1
|