Viper 500+ Replacement remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45447
Printed Date: May 13, 2025 at 10:35 PM

Topic: Viper 500+ Replacement remote

Posted By: fuxxy
Subject: Viper 500+ Replacement remote
Date Posted: December 17, 2004 at 7:23 PM

I just got my hands on a DEI Viper 500+ with the wiring harness and all the hardware. However, I'm trying to find replacement transmitter remotes for this system, I found the part number for the aftermarket 4-button remote (485T) and I'm looking for the part number for the OEM 'stock' two-button remote..

Also, Is there any special way I need to 'assign' these remotes to work on my alarm? Special programmers or whatnot?

Replies:

Posted By: daze
Date Posted: December 17, 2004 at 9:41 PM

Under the RTFM Act of 1983 I am not at liberty to give you the answer but I have a website that you may wanna look at !

https://www.canbroc.com/support/support.htm

Posted By: wiretapper
Date Posted: December 17, 2004 at 10:05 PM

LMFAO! Good one daze!

Posted By: hagmanti
Date Posted: December 17, 2004 at 10:09 PM

From DEI's transmitter cross reference page, the replacement remote depends on the date code on the brain, and is either the 493C or the 492T.

Just FYI (I don't know much about these old viper alarms, so I'm not saying a 485T is the wrong one).

Me

Posted By: fuxxy
Date Posted: December 18, 2004 at 1:22 PM

Quote:

From DEI's transmitter cross reference page, the replacement remote depends on the date code on the brain, and is either the 493C or the 492T.
I just checked that website, and the "date code" for my 500+ shows to be either 3I-5K (with the replacement remote being the 493C), or 5L-7E (with the remote being the 492T).
I checked the little "OK" sticker on my alarm 'brain', and it shows OK/7H. That's past the date code for the latter model, does it still use the same transmitter?
The replacement part # of 485T I got from the owner's/installation manual for that model online..I'm not 100% sure it's correct.

Posted By: swamprat323
Date Posted: December 18, 2004 at 2:13 PM

HERE

Main Page