2004 Dodge Ram brake light warning

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45488
Printed Date: April 27, 2024 at 7:05 AM

Topic: 2004 Dodge Ram brake light warning

Posted By: Jasonj84
Subject: 2004 Dodge Ram brake light warning
Date Posted: December 18, 2004 at 7:16 PM

I installed a deign-tech starter on my 2004 Ram 1500. Everything works fine, except I get the red brake indicator light displayed in instrument panel when I remote start. It stays on until I shutoff and restart with the key. Do I need a resistor on the brake wire to the remote starter ? Any help would be appreciated, as I am not using the remote start because of this. Thanks

-------------
Jason

Replies:

Posted By: DanDan
Date Posted: December 18, 2004 at 8:13 PM

You must power up all subsystems with a remote start, especially on a Dodge. Theres a ignition wire your missing. Not resistors.

DanDan

Posted By: Jasonj84
Date Posted: December 19, 2004 at 11:51 AM

Thank you. I didn't do all the subsystems. I'll try that.

-------------
Jason

Print Page | Close Window