ground when armed output ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45501
Printed Date: July 16, 2025 at 6:51 AM

Topic: ground when armed output ?

Posted By: gcorrea
Subject: ground when armed output ?
Date Posted: December 19, 2004 at 12:45 AM

i installed a used viper alarm that was bought off of ebay and installed in my friends 95 suburban. everything works fine exept for the ground when armed output the kills the starter. my question is this how can someone or what can damage this output? will the alarm still function properly with this output damaged, aside from not having a starter kill what else can go wrong later on.

-------------
gcorrea

Replies:

Posted By: mobileworks
Date Posted: December 19, 2004 at 3:58 PM

This output is normally just used for the starter kill so nothing major will happen to the car ...just the starter kill won't work.. which doesn't do a whole lot for "security"

The other things that this would be used for are window roll up modules, and other accessory type controlers...

Overall you can still wire up that relay to do starter kill by using the siren output or other wires....

This wire could be damaged by improper installation...

Another Ebay refurbished viper..

-------------

Print Page | Close Window