chrysler factory remote for remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45519
Printed Date: May 09, 2025 at 10:45 AM

Topic: chrysler factory remote for remote start

Posted By: hudi
Subject: chrysler factory remote for remote start
Date Posted: December 19, 2004 at 2:27 PM

I have a 2001 chrlsler town & country with auto tailgate and passenger door

the factory remote is a six button remote.

How can i get the button that controls the automatic driver side door (which isnt an automatic door) to triger a relay for a remote start

Thanks

-------------
Scorpion

Replies:

Posted By: swamprat323
Date Posted: December 19, 2004 at 2:46 PM

Find the wire that use that button,, and use the input wire of the add on remote start, should not need a relay, just need to push 2 -3 times, or waht even the RS is set to.

Posted By: hudi
Date Posted: December 19, 2004 at 5:45 PM

i tried looking by the door and by the overhead console for the feed for this

it doesnt seem to be there. could be disconnected from the factory.

any ideas where i can look to find the correct wire?

-------------
Scorpion

Print Page | Close Window