Anti Grind Viper 791XV

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45538
Printed Date: May 10, 2025 at 10:41 PM

Topic: Anti Grind Viper 791XV

Posted By: whensmett
Subject: Anti Grind Viper 791XV
Date Posted: December 19, 2004 at 6:53 PM

Viper 791XV and Grand Cherokee 2002.

Does any body knows how to connect the heavy gauge Green wire. According to the Viper install manual this is a Starter input and is being used for anti grind or starter kill.

Thanks

-------------
whensmett

Replies:

Posted By: wblakes
Date Posted: December 19, 2004 at 7:46 PM

cut the starter wire and green goes to the key side and purple goes to the motor side.

Posted By: whensmett
Date Posted: December 19, 2004 at 7:58 PM

So no relay required? Thanks

-------------
whensmett

Posted By: swamprat323
Date Posted: December 19, 2004 at 8:14 PM

Nope you do not need a relay.

Print Page | Close Window