killswitch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45564
Printed Date: June 07, 2024 at 8:18 AM

Topic: killswitch

Posted By: gcorrea
Subject: killswitch
Date Posted: December 19, 2004 at 9:45 PM

i would like a killswitch that breaks the starter wire when the ignition is off and needs the brake pedal depressed in order for the key to be able to engage the starter. does anyone have a diagram on this?thanks.

-------------
gcorrea

Replies:

Posted By: auex
Date Posted: December 19, 2004 at 9:54 PM

Passive starter kill diagrams

Or basically, 85 ground, 86 +brake input, 30 one end of starter wire, 87 other end of starter wire.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: gcorrea
Date Posted: December 19, 2004 at 11:04 PM

whats best single relay or dual relay like in the passive starter diagram.

-------------
gcorrea

Posted By: auex
Date Posted: December 19, 2004 at 11:07 PM

Well the simplest is the one I wrote out. 1 relay 1 trigger. You could then go brake and horn to start the car by wiring horn to pin 85 and brake to 86.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: gcorrea
Date Posted: December 20, 2004 at 12:20 AM

cool thanks.auex

-------------
gcorrea

Print Page | Close Window