Viper 791XV + imobilizer bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45574
Printed Date: March 20, 2026 at 11:27 PM

Topic: Viper 791XV + imobilizer bypass

Posted By: Chiana
Subject: Viper 791XV + imobilizer bypass
Date Posted: December 19, 2004 at 11:46 PM

I amgoign to be installig a 791XV with an immobilized by pass. I know how to make the immobilizer work, but I don't know where to plug it into the 791XV. Where would I plug it in soe it turns the immobilizer by pass on when it remote starts?

-Chris

Replies:

Posted By: Ravendarat
Date Posted: December 19, 2004 at 11:55 PM

There are instructions with it, but you dont just plug it in. Need to know what kind of bypass to tell you how to hook it up.

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Posted By: Chiana
Date Posted: December 19, 2004 at 11:57 PM

It is the one that comes from dei. There is no place to directly plug it in to the 791XV. It has to be connectoed to a wire on he 791xv.. but i don't know which one.

Posted By: meltingplastic
Date Posted: December 20, 2004 at 10:38 AM

its the blue status output wire

-------------
Driving a Bagged, Caddied 02 s10

Print Page | Close Window