I bought a Crimestopper 900VI remote starter, I then bought a DEI 555 L for the Passlock 2 system bypass. I have tried several times to get it hooked uo correctly but it hasn't started yet. It will crank for a few moments but never starts. The owners manuals for both pieces I bought call wires different things. I think I am not bypassing the Passlock 2, or I am not hooking up the OEM arm and OEM disarm wires up correctly. I was wondering if anyone had a wire diagram for the Bravada or any ideas of what wires I am hooking up wrong . I do have a good ground. Thanks in advance for any help or pointers you can give.
-------------
mevenson
Oldsmobile | Bravada | 1997-1999 |
Remote Starter Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Start: | | YELLOW | IGNITION SWITCH HARNESS * |
Ignition #1: | | PINK | IGNITION SWITCH HARNESS |
Ignition #2: | | WHITE | IGNITION SWITCH HARNESS |
Ignition #3: | | N/A | |
Accessory: | | ORANGE | IGNITION SWITCH HARNESS |
Brake Light: | | WHITE | AT SWITCH ABOVE BRAKE PEDAL |
Tach Signal: | | WHITE | AT PCM MODULE |
Parking Lights: | | BROWN (+) | AT HEADLIGHT SWITCH |
Headlights: | | YELLOW (+) | AT HEADLIGHT SWITCH |
Diesel Glow Plug: | | | |
Clutch Bypass Wire: | | | |
Notes: | | * This Vehicle Is Equipped With PASSLOCK II Anti-theft system. See Note # 113 - Bypassing PASSLOCK II Theft Deterrent System Diagram. |
Oldsmobile | Bravada | 1997-1999 |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Constant +12 Volts: | | RED | IGNITION SWITCH HARNESS |
OEM Alarm Disarm: | | LT. GREEN (-) | DRIVER'S KICK PANEL |
Dome Lights/Superv: | | WHITE (-) | AT PIN SWITCH OR COURTESY LIGHT |
OEM Horn: | | BLACK (-) | STEERING COLUMN HARNESS |
Power Lock: | | LT. BLUE (+) | DRIVER'S KICK PANEL ** |
Power Unlock: | | WHITE (+) | DRIVER'S KICK PANEL ** |
Trunk Release: | | BLACK/ WHITE (+) | AT RELEASE SWITCH |
Alarm Input Wire: | | WHITE (-) | AT PIN SWITCH OR COURTESY LIGHT |
Notes: | | * See Installation Note #202 - Positive Pulse Door Lock Diagram. |
-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!
make it simple, i bypass the passlock II with a resistance that is easily measured.. works everytime,
place the resistance from the cut yellow wire that leads away from the key, and connect it to the other, black or orange w/black wire..
u might have a good connection, but unless the output from the crimestopper for bypassing is timed just right, it might not activate the 555L