Print Page | Close Window

Auxiliary Defrost & Underbody Lights ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45772
Printed Date: April 29, 2024 at 6:40 PM


Topic: Auxiliary Defrost & Underbody Lights ?

Posted By: rudef2
Subject: Auxiliary Defrost & Underbody Lights ?
Date Posted: December 22, 2004 at 2:24 PM

hey all i was wondering how i should go about wiring my defrost switch and my neon underbody lights to my auxiliary outputs.

i would like defrost to either come on when i remote start all the time, or on a channel.

Also i would like to be able to turn on my neon underbody lights on another channel.

i have a 1995 Dodge Neon. The alarm is the Viper 771XV.

here is a diagram for you to refer to from my installation manual to help anyone answer my question.

posted_image

i have to have a relay setup for the underbody lights right? If so could someone tell me which prongs to put what on. I have never been good w/ relays :errr:



-------------



Replies:

Posted By: secureauto
Date Posted: December 23, 2004 at 2:54 AM
According to the wiring diagram, blue/white (-) can be used for your defogger. Have you tested your defogger switch to see if its (-) or (+)? Now for you neon lights, you can use CH.4 output violet/black (-) and program it to latched. It'll allow you to turn your lights on and off. I've added a link that'll show you how to convert the polarity with relays.


Converting polarity

-------------
ASE Certified


Print Page | Close Window