Print Page | Close Window

compustar double pulse with driver prior

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45776
Printed Date: May 08, 2025 at 12:48 PM


Topic: compustar double pulse with driver prior

Posted By: ThurzNite
Subject: compustar double pulse with driver prior
Date Posted: December 22, 2004 at 3:06 PM

I have a 97 Nissan Maxima, and so far so good. I've programmed the Compustar for double pulse, and want to get the driver priority to work.

I've relayed the driver door motor and it's ready to go. I've tested it by grounding the trigger and works fine. Next I program the Compustar, and it unlocks the driver door fine. However when disarming for a 2nd time to unlock all doors, nothing happens.

This's leading me to beleive that you can either have Driver Priority, or Double Pulse. That doesn't seem necessary, cuz the driver priority should only need a ground signal to operate. Can someone shed some light? Thank you.

Jae



Replies:

Posted By: secureauto
Date Posted: December 23, 2004 at 1:58 AM
according to the directwire, GREEN/ YELLOW in driver door requires a double pulse to unlock, a single pulse will only disarm factory alarm but will not unlock.

here's a link
96 Maxima

-------------
ASE Certified


Print Page | Close Window