96 GMC JImmy new alarm/remotestart prob.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45778
Printed Date: May 08, 2025 at 5:04 PM

Topic: 96 GMC JImmy new alarm/remotestart prob.

Posted By: turbovr6
Subject: 96 GMC JImmy new alarm/remotestart prob.
Date Posted: December 22, 2004 at 3:49 PM

I need some help please. 1996 GMC Jimmy. I just installed a Designtech(I know, not the best) "Ready Start" system. I have installed alarms before, and I am an auto tech by trade. I went over my connections 4or 5 times. When I put the fuse in the alarm gets power. starts going off, and the remote will not shut it off. When it does finaly shut off I try the remote start and I hear the alarm module clicking like crazy(sounds like a turn signal is on), and thats it, it does'nt even attemp to start the truck. The truck has keyless entry, do I have to bypass this somehow? Thats the only thing I can think of that I am missing.

Thanks

Replies:

Posted By: turbovr6
Date Posted: December 22, 2004 at 4:29 PM

sorry about the double post!

Posted By: turbovr6
Date Posted: December 22, 2004 at 5:06 PM

I sat on hold with tech support hotline for 1/2 hour, then hung up

Here is a pic of the wire diagram for the alarm
[IMG]https://www.turbovr6.net/sss.jpg[/IMG]
this is how I have it connected:
blue to pink on truck
yellow to yellow on truck
white to orange on truck
Pink to 12v constant
(skipping locks)
Black to ground
yellow to parking lights
white black to relay(-) for Ign.2
blue to siren
orange to white at pedal
white to relay
GREEN / WHITE to white on pin switch
green to white on coil
I did not install the hood pin yet, but the wire is not grounded, so that should not be a problem

Posted By: turbovr6
Date Posted: December 22, 2004 at 5:08 PM