+ Parking Light Output from Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45871
Printed Date: July 13, 2025 at 5:08 AM

Topic: + Parking Light Output from Remote Start

Posted By: gccm
Subject: + Parking Light Output from Remote Start
Date Posted: December 23, 2004 at 5:11 PM

I have DirectStart C423 Remote Car Starter with relayed a +12V output. The 2001 Chev Impala seems to have two (2) + wires for the parking lights at the switch (yellow for the front and BROWN / white for the rear). Any suggestions on how to wire this configuration?

Thanks,
Guy

Replies:

Posted By: audifive
Date Posted: December 23, 2004 at 5:23 PM

use a relay and use the neg trigger (white wire at the bcm)

85- pos 12 from RS

86 and 87- ground

87a- white wire bcm side

30- white wire parking light relay side

Posted By: gccm
Date Posted: December 23, 2004 at 5:33 PM

Thank you!

Print Page | Close Window