Tach & Hood Switch Wires

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45883
Printed Date: July 17, 2025 at 8:24 PM

Topic: Tach & Hood Switch Wires

Posted By: gccm
Subject: Tach & Hood Switch Wires
Date Posted: December 23, 2004 at 8:29 PM

I can't seem to locate a firewall gromet accessible for pulling tach and hood switch wires from the remote starter. 2001 Chev Impala. Any ideas on how these wires are nomally pulled through the firewall?

Thanks,
Guy

Replies:

Posted By: cruzzer
Date Posted: December 24, 2004 at 2:18 AM

You might have to drill you own. Remeber to use a gromet in order to protect your wires.

Posted By: Ravendarat
Date Posted: December 24, 2004 at 7:55 AM

There is a huge light color groment in the fire wall that has a large harness running through it. Take a knife and cut a slit in the groment and go through there. Its quick easy and will protect the wires.

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Print Page | Close Window