Keysense wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45913
Printed Date: July 12, 2025 at 7:58 PM

Topic: Keysense wire

Posted By: pimpricer
Subject: Keysense wire
Date Posted: December 24, 2004 at 1:11 AM

Hello, Im installing a remote starter for a 2005 Toyota 4runner. Can someone tell me where the Keysense wire is located? Its suppose to be a GREEN/ YELLOW wire. Im suppose to hook up the Ignition #3 wire to it.

-------------
Hong

Replies:

Posted By: secureauto
Date Posted: December 24, 2004 at 1:19 AM

According to directwire this is the keysense info:

Keysense GREEN/ YELLOW - ign harn or BECU, top plug, pin 14
Notes: Using the status output to trigger this wire during remote start will disarm the factory alarm without unlocking the doors.

The Body ECU is part of the fuse box under the driver side dash. The three plugs on the right side edge of the fuse box are for the Body ECU.

-------------
ASE Certified

Print Page | Close Window