2003 Cavalier Passlock II

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45933
Printed Date: July 17, 2025 at 1:55 AM

Topic: 2003 Cavalier Passlock II

Posted By: baldy51497
Subject: 2003 Cavalier Passlock II
Date Posted: December 24, 2004 at 2:13 PM

I have the DEI Passlock bypass module and the car is starting and then stalling. I am using a Ultra Start 1250. I have the pink wire to ignition, the yellow wire to the cylinder side of the yellow in the ignition, the BLACK / YELLOW wire to the car side of the yellow cylinder wire. The all black wire tapped into the black wire at ignition. I am connecting the blue wire to the orange wire on the remote start module.

Replies:

Posted By: mo12v
Date Posted: December 24, 2004 at 6:33 PM

R U sure the ORANGE wire is Output while Running?? Try grounding the BLUE wire from DEI BYpass and Remote Start it.
I thought the ORANGE wire from 1250 was Negative output for Starter Kill

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: baldy51497
Date Posted: December 25, 2004 at 12:34 PM

mo 12v

I am sorry to bother you, I found my problem. I was getting desperate because it was a christmas present. I was connecting the plug to the DEI bypass module in tight quarters and didn't get the plug in all the way. So I got it now. Thanks for your time, these forums are great things. I really answered a lot of questions by reading previous posts. But I got it all set now, it runs great.

Print Page | Close Window