remote start broblem_Cyborg-RF

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4601
Printed Date: November 16, 2025 at 9:32 AM

Topic: remote start broblem_Cyborg-RF

Posted By: xshen
Subject: remote start broblem_Cyborg-RF
Date Posted: October 18, 2002 at 7:50 AM

I bought Cyborg-RF 2 way alarm with remote start. The remote start partion has only one wire for input"WHITE/ Blue -Input Connect to true ingition". In my consideration, it is used for dectect the engine situation, other words through the wire, the unit know the engine started or not. So I leave it with not connect. I test the unit. There are not output voltage at all.

Does any body can help me to figure out what problem is?

Thanks very much!

That is

Replies:

Posted By: Velocity Motors
Date Posted: October 18, 2002 at 6:13 PM

That wire is used for the primary ignition and needs to be hooked up to the car's ignition harness. What year, make, model car is it and I'll see which wire you need to hook up ( if not more than one )

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window