Print Page | Close Window

93 Explorer auto, Prostart CT 5000, help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46043
Printed Date: July 15, 2025 at 11:19 PM


Topic: 93 Explorer auto, Prostart CT 5000, help

Posted By: lbrowne
Subject: 93 Explorer auto, Prostart CT 5000, help
Date Posted: December 26, 2004 at 11:50 AM

1993 Explorer Eddie Bauer, auto tranny.

Prostart CT 5000 3in1 remote starter

We have both remotes starting the vehicle but can't figure out how to wire in the remote locks. The wiring should be the same for explorers 91-94. Please help.

We haven't tried wiring the alarm yet...its just mounted.

Thanks,

lbrowne



-------------
I change cars too often to put one here.



Replies:

Posted By: Joe Neal
Date Posted: December 26, 2004 at 2:59 PM

Lock = PINK / YELLOW    DRIVER KICK PANEL
UNLock = PINK/LIGHT GREEN    DRIVER KICK PANEL
Without OEM Keyless = Reversal Rest At Ground Door Locks
With OEM Keyless  = Negative Pulse Door Locks





Posted By: lbrowne
Date Posted: December 26, 2004 at 4:16 PM
This truck did not have remote keyfobs from the factory - at least I never got them when I bought the truck from the original owner.

-------------
I change cars too often to put one here.




Posted By: lbrowne
Date Posted: December 26, 2004 at 9:36 PM

This site is great, I think I've found what I'm looking for through more extensive searching through the archives.

I'll post again if I have any other questions! :)



-------------
I change cars too often to put one here.





Print Page | Close Window