Print Page | Close Window

Viper 300esp on 97 vert

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46060
Printed Date: May 15, 2024 at 3:42 AM


Topic: Viper 300esp on 97 vert

Posted By: mustangman33
Subject: Viper 300esp on 97 vert
Date Posted: December 26, 2004 at 5:19 PM

Hey guys, I'm new to the board with a question, wife wrecked her old kia sportage so I took the alarm off of it and want to put it on my 97 stang, now the viper has the wiring colors on it, but confused on how to hook it up, like the starter kill, as to my understanding, it has one wire for ignition zone, that should goto ignition1, but when I cut my ignition wire, should the other half of the ignition goto When Armed? Also can I program this myself, or do I need one of those bitwriter things?

thanx in advance. 



-------------
357W, kblack pistons, 030 9.5.1 comp, arp rod bolts, world windsor jr. heads, hydro roller setup, torker II intake, 1.7 rocker arms, holly 750, bbk o/r h-pipe, hooker 351w swap headers, flow masters



Replies:

Posted By: KarTuneMan
Date Posted: December 29, 2004 at 1:22 PM
Ther is a section called BASICS on the site here you can click on relays the starter interupts ....it will show you how to wire up your starter kill.     Home page top left corner

-------------



Posted By: swamprat323
Date Posted: December 29, 2004 at 5:26 PM
Here is the manural for your alarms.
manural

You can buy a new wire harness for it it make things easier to wired up.
wires


Print Page | Close Window